2hp Brst
Voltage controlled burst generator for rhythmic mayhem
2 HP Eurorack module
Brst is a voltage controlled burst generator and trigger delay that outputs a stream of triggers upon receiving a gate or trigger input. It excels at creating bouncing ball effects, IDM-style drum flurries, and humanized clock signals with CV control over both pulse count and inter-pulse timing. Its wide range from 1 to 32 repeats and 10ms to 500ms rate makes it equally useful for subtle trigger doubling and wild rhythmic explosions.
Features
- Voltage controlled burst generator
- CV over number of pulses (0V-5V range)
- CV over rate of output (0V-5V range)
- Initial trigger can be included or omitted via toggle
- Wide burst range from 1 to 32 repeats
- Rate range from 10ms to 500ms between successive pulses
- BURST LED indicates output pulses
- 2HP skiff-friendly format
- Trigger threshold at 2.5V
- Output range 0V-5V
Controls & Jacks (8)
- PULSES — Controls the number of pulses that output when a trigger or gate signal is received. Range: 1 to 32 pulses.
- OUT — Burst output. Outputs a stream of trigger pulses. Range: 0V to 5V.
- TRIG — Trigger input. A stream of trigger signals will emit from OUT when a trigger or gate signal is received at this input. Threshold: 2.5V.
- RATE — Controls the delay time in between successive pulses. Range: 10ms to 500ms.
- PULSES CV — Control voltage input for PULSES. Range: 0V to 5V.
- TRIG TOGGLE — Toggle that will include or omit the initial trigger signal from the output.
- RATE CV — Control voltage input for RATE. Range: 0V to 5V.
- BURST — Green LED that flashes to indicate each pulse emitted from OUT
How-To Guides
- Bouncing Ball Percussion
- IDM Drum Flurry
- Humanized Clock Signal
- Clock Multiplier
- Generative Rhythm Machine
- Snare Roll Effect
- Rhythmic Gate Burst for Synthesis
- Trigger Delay
- Burst Layering with Sequencer
Explore the interactive Brst panel on BleepDex — tap any control to learn what it does.
