2hp Mult
Passive 2-channel, 3-output signal splitter in 2HP.
2 HP Eurorack module
A passive 2HP signal splitter with two channels of three outputs each. Channel 1 normals into channel 2 when Input 2 is unpatched, so a single signal patched into Input 1 is duplicated to all six outputs; patch a second cable into Input 2 to split the module into two independent 1-to-3 mults. Because the module is fully passive (no buffers, no power), it works equally well for CV, gates, clocks, triggers, and audio, but heavy fan-out can cause minor voltage droop on long DC signals like pitch CV.
Features
- Passive 2-channel signal splitter (no power required)
- 2 inputs, 6 outputs (3 outputs per input)
- Channel 1 normalled to channel 2 when Input 2 is unpatched
- Single 1-to-6 mult or dual 1-to-3 mult in a single 2HP slot
- Skiff-friendly: only 10mm deep
- Works with audio, CV, gates, triggers, and clocks
- No buffering — best suited to short cable runs and undemanding signals
- Zero current draw on +12V, -12V, and +5V rails
- Available in silver or black panel
- Manufactured by 2hp
Controls & Jacks (8)
- Input 1 — Signal input for channel 1; copied to Outputs 1-3. Normalled to Input 2 when Input 2 is unpatched.
- Output 1 — Copy of the channel 1 input signal.
- Output 2 — Copy of the channel 1 input signal.
- Output 3 — Copy of the channel 1 input signal.
- Input 2 — Signal input for channel 2; copied to Outputs 4-6. When unpatched, channel 2 receives Input 1 (so all six outputs carry Input 1).
- Output 4 — Copy of the channel 2 input signal (or of Input 1 when Input 2 is unpatched).
- Output 5 — Copy of the channel 2 input signal (or of Input 1 when Input 2 is unpatched).
- Output 6 — Copy of the channel 2 input signal (or of Input 1 when Input 2 is unpatched).
How-To Guides
- One Source to Six Destinations
- Two Independent 1-to-3 Mults
- Polyphonic Pitch CV Bus
- Clock and Reset Distribution
Explore the interactive Mult panel on BleepDex — tap any control to learn what it does.
