after-later-audio-mingles

After Later Audio Mingles

Dual 3-channel panning mixer with built-in LFO.

12 HP Eurorack module

Mingles is a standalone dual three-channel panning mixer with a built-in LFO; it can also connect by pin headers to Barback or Bartender without using a channel.

Features

  • Dual three-channel panning mixer with a built-in LFO.
  • Equal-loudness voltage-controlled panning and linear-response VCAs for both channels.
  • The internal LFO provides normal and inverted panning modulation for alternating channel movement.
  • The LFO defaults to triangle wave; a rear jumper switches it to square wave.

Controls & Jacks (30)

  • Channel 1 Right Output— Right output of Channel 1's three-input stereo mix.
  • Channel 1 Level 2— Sets the level of Channel 1 input 2 in the three-channel mix.
  • Channel 1 Left Output— Left output of Channel 1's three-input stereo mix.
  • Main Mix Right Output— Right output of the combined Channel 1 and Channel 2 mix.
  • Channel 2 Pan CV Amount— Sets the amount of control voltage applied to Channel 2 panning.
  • Channel 2 Input 1— Audio input 1 for Channel 2.
  • Main Mix Left Output— Left output of the combined Channel 1 and Channel 2 mix.
  • Channel 2 Input 3— Audio input 3 for Channel 2.
  • LFO Rate CV Input— Control-voltage input for the LFO rate.
  • Channel 1 Input 3— Audio input 3 for Channel 1.
  • Channel 2 Input 2— Audio input 2 for Channel 2.
  • LFO Output— Built-in LFO output.
  • Channel 2 Pan CV Input— Panning control-voltage input for Channel 2; the internal LFO is normalled here inverted when nothing is patched.
  • Channel 2 Level 2— Sets the level of Channel 2 input 2 in the three-channel mix.
  • Channel 2 Left Output— Left output of Channel 2's three-input stereo mix.
  • Channel 1 VCA CV Input— Linear VCA control-voltage input for Channel 1.
  • Channel 2 Level 1— Sets the level of Channel 2 input 1 in the three-channel mix.
  • Channel 1 Level 1— Sets the level of Channel 1 input 1 in the three-channel mix.
  • Channel 1 Input 2— Audio input 2 for Channel 1.
  • Channel 2 VCA CV Input— Linear VCA control-voltage input for Channel 2.
  • Channel 2 Right Output— Right output of Channel 2's three-input stereo mix.
  • Channel 2 Level 3— Sets the level of Channel 2 input 3 in the three-channel mix.
  • Channel 1 Pan— Sets Channel 1's equal-loudness position between its left and right outputs.
  • Channel 1 Pan CV Input— Panning control-voltage input for Channel 1; the internal LFO is normalled here when nothing is patched.
  • Channel 1 Input 1— Audio input 1 for Channel 1.
  • LFO Rate— Sets the rate of the built-in LFO.
  • LFO Indicator— Indicator beside the LFO Rate control.
  • Channel 2 Pan— Sets Channel 2's equal-loudness position between its left and right outputs.
  • Channel 1 Level 3— Sets the level of Channel 1 input 3 in the three-channel mix.
  • Channel 1 Pan CV Amount— Sets the amount of control voltage applied to Channel 1 panning.

Explore the interactive Mingles panel on BleepDex — tap any control to learn what it does.

416567d