blue-lantern-modules-stereo-sir-mix-a-lot

Blue Lantern Modules Stereo Sir Mix-A-Lot

Six-channel mono summing mixer for audio and CV

24 HP Eurorack module

Stereo Sir Mix-A-Lot is a Blue Lantern Modules 6-channel stereo mixer with per-channel level, pan, mute, AC/DC coupling, and dual send buses (A and B) with FX returns. Features a direct input with selectable impedance and both individual and summed outputs.

Features

  • 6-channel mono summing mixer
  • Per-channel AC/DC toggle switch with 2.2uF capacitor in AC mode
  • Per-channel mute toggle switch
  • Suitable for both audio and control voltage summing
  • Direct input accepts additional synth-level or line-level signal
  • Rear slide switch selects 200k (synth level) or 20k (line level, labeled FF) resistor for direct input
  • Chainable: use direct input at synth level to connect multiple units
  • Ships with TL072 op-amp in IC socket — user-upgradeable to audio-grade dual op-amp (e.g. OPA2227, OPA2134) compatible with +/-12V
  • Euro 12HP format

Controls & Jacks (60)

  • Output— Summed mono output from all channels
  • SEND A B— Master send level for send bus A/B
  • SEND B 1— Send B level for channel 1
  • FX 1— FX send level control 1
  • CH2— Gain control for channel 2
  • Channel 4 Input— Audio or CV input for channel 4
  • PAN 1— Stereo pan control for channel 1
  • SEND A 1— Send A level for channel 1
  • B 1— Send B return/output jack 1
  • Channel 6 Input— Audio or CV input for channel 6
  • Channel 2 Input— Audio or CV input for channel 2
  • PAN 2— Stereo pan control for channel 2
  • A— Send A return/output jack
  • B 2— Send B return/output jack 2
  • CH1— Gain control for channel 1
  • Direct Input— Direct input for additional synth-level or line-level signal
  • PAN 3— Stereo pan control for channel 3
  • Channel 3 Input— Audio or CV input for channel 3
  • 6 LEVEL— Level control for channel 6
  • 1 LEVEL— Level control for channel 1
  • CH1— Channel 1 direct output jack
  • 5 LEVEL— Level control for channel 5
  • Channel 6 Mute— Mute switch for channel 6 to silence without unplugging
  • Channel 5 Input— Audio or CV input for channel 5
  • PAN 4— Stereo pan control for channel 4
  • CH2— LED indicator for channel 2 signal level
  • Channel 1 Input— Audio or CV input for channel 1
  • B 3— Send B return/output jack 3
  • FX 2— FX send level control 2
  • FX 3— FX send level control 3
  • PAN 5— Stereo pan control for channel 5
  • SEND B 2— Send B level for channel 2
  • Channel 1 Mute— Mute switch for channel 1 to silence without unplugging
  • 3 LEVEL— Level control for channel 3
  • SEND A 2— Send A level for channel 2
  • B 4— Send B return/output jack 4
  • PAN 6— Stereo pan control for channel 6
  • SEND B 3— Send B level for channel 3
  • FX 4— FX send level control 4
  • 2 LEVEL— Level control for channel 2
  • SEND A 3— Send A level for channel 3
  • Channel 2 Mute— Mute switch for channel 2 to silence without unplugging
  • SEND B 4— Send B level for channel 4
  • Channel 1 AC/DC— Toggle between AC mode (audio signals) and DC mode (control voltages) for channel 1
  • SEND A 4— Send A level for channel 4
  • SEND A 5— Send A level for channel 5
  • SEND B 5— Send B level for channel 5
  • SEND B 6— Send B level for channel 6
  • 1 MUTE— LED indicator for channel 1 mute status
  • Channel 2 AC/DC— Toggle between AC mode (audio signals) and DC mode (control voltages) for channel 2
  • Direct Input Mode— Rear slide switch to select between synth level (200k resistor) and line level (20k resistor) for direct input
  • Channel 6 AC/DC— Toggle between AC mode (audio signals) and DC mode (control voltages) for channel 6
  • Channel 3 Mute— Mute switch for channel 3 to silence without unplugging
  • 4 LEVEL— Level control for channel 4
  • 24HP— LED panel indicator
  • Channel 3 AC/DC— Toggle between AC mode (audio signals) and DC mode (control voltages) for channel 3
  • Channel 4 AC/DC— Toggle between AC mode (audio signals) and DC mode (control voltages) for channel 4
  • Channel 4 Mute— Mute switch for channel 4 to silence without unplugging
  • Channel 5 AC/DC— Toggle between AC mode (audio signals) and DC mode (control voltages) for channel 5
  • Channel 5 Mute— Mute switch for channel 5 to silence without unplugging

How-To Guides

  • Basic Audio Submix
  • Control Voltage Summing
  • Live Mute Performance
  • Chaining Two Sir Mix-A-Lot Units
  • Mixing External Line-Level Device
  • Mixed Audio and CV on Same Output
  • Noise Layering for Texture
  • Upgrading the Op-Amp for Audio Quality
  • Drum Voice Submix

Explore the interactive Stereo Sir Mix-A-Lot panel on BleepDex — tap any control to learn what it does.

8c571ce