Bubblesound VER2

No data available from provided manual

12 HP Eurorack module

The Bubblesound I4I (VER2) is a 6HP combination ADSR envelope generator, VCA, and LFO module. The envelope generator is based on the Roland SH-101/M-140 transistor circuit, giving it a snappy, musical response. The EG feeds both a dedicated envelope output and a velocity-sensitive VCA section. The built-in LFO ranges from 10-second cycles up to 200Hz, with triangle and square outputs always active. When no gate is patched, the LFO square output is normalled to the gate input, causing the envelope to loop automatically. The audio VCA can be switched between envelope and velocity CV sources, with selectable exponential or linear response curves.

Controls & Jacks (19)

• A— Sets the attack time of the envelope
• Sync Select— Selects between Sync, LFO, and Free modes
• Gate In— Gate input to trigger the envelope
• D— Sets the decay time of the envelope
• Vel In— Velocity CV input for dynamic response
• S— Sets the sustain level of the envelope
• VEL/ENV— Switches between velocity and envelope modes
• EXP/LIN— Switches between exponential and linear envelope curves
• Audio In— Audio input for the VCA
• R— Sets the release time of the envelope
• LFO— Controls the LFO rate when in LFO mode
• LFO LED— Indicates LFO activity or rate
• TRI Output— Triangle waveform LFO output
• SQR Output— Square waveform LFO output
• ENV Output— Envelope CV output
• Audio Out— Main audio output from the VCA
• ENV INV Output— Inverted envelope CV output
• VEL Out— Velocity CV output
• Gate LED— Indicates gate activity

Explore the interactive VER2 panel on BleepDex — tap any control to learn what it does.