Dnipro Modular Krait
Three channels of recorded, cyclic, random, or mixed modulation
6 HP Eurorack module
Krait is a three-channel modulation source whose channels can independently record knob gestures, generate tempo-synchronized LFOs, or create loopable random voltages. Channel 2 can instead mix Channels 1 and 3, while per-channel range selection, external clocking, autosave, and mode-specific performance controls make the compact interface highly flexible.
Features
- Three independent modulation channels
- Knob Recorder loops up to eight bars
- Tap-tempo morphable LFO
- LFO phase and amplitude control
- Synchronized random generator
- Loopable 16-step random patterns
- Random slew and depth control
- Channel 2 mixer for Channels 1 and 3
- External clock synchronization
- Dedicated reset input
- Per-channel unipolar or bipolar range
- Dedicated output per channel
Controls & Jacks (19)
- BIG — Acts as the main performance, recording, and tap-tempo control.
- Channel 2 LED — Shows that Channel 2 is selected.
- Potentiometer — Edits the primary value for the selected channel and menu page.
- Reset In — Resets synchronized playback and loop position so Krait can restart its modulation cycles in time with the patch.
- Channel 3 LED — Shows that Channel 3 is selected.
- Output 3 — Dedicated CV output for Channel 3. Its range is selected per channel as bipolar -5V to +5V or unipolar 0V to +5V.
- Next — Selects the next channel or increases the highlighted setting.
- Output 2 — Dedicated CV output for Channel 2. In Mixer mode this carries the mix of Channels 1 and 3; otherwise it carries Channel 2's own modulation.
- Output 1 — Dedicated CV output for Channel 1. Its range is selected per channel as bipolar -5V to +5V or unipolar 0V to +5V.
- Output 1 LED — Indicates Channel 1 output activity.
- Output 3 LED — Indicates Channel 3 output activity.
- Clock In — Accepts an external clock pulse to synchronize Knob Recorder loops, LFOs, Random sequences, and the internal clock system. With no cable pat
- Output 2 LED — Indicates Channel 2 output activity.
- Channel 1 LED — Shows that Channel 1 is selected.
- Previous — Selects the previous channel or decreases the highlighted setting.
- SET — Opens mode-specific settings for the selected channel.
- MOD — Chooses the selected channel's operating mode and output range.
- Function O — Performs the circle-marked action for the active mode.
- Function X — Performs the cross-marked action for the active mode.
How-To Guides
- Clocked LFO
- Record a Gesture Loop
- Looped Random Pattern
- Channel 2 CV Mixer
- External Clock and Reset
- Bipolar Modulation
Explore the interactive Krait panel on BleepDex — tap any control to learn what it does.
