Dnipro Modular Radiant
Morphable multi-effect processor with 9 algorithms and presets
14 HP Eurorack module
Radiant is a morphable multi-effect processor by Dnipro Modular and Sinevibes featuring 9 selectable core algorithms organized into three Triads, a three-band filter, reverb, and a sound reverse function. It offers both classic and innovative effects — from dub delay and shimmer reverb to chord wrapping and barberpole phasing — with preset storage and smooth CV-controlled morphing between presets for expressive, evolving textures.
Features
- 9 selectable core algorithms in 3 Triads (Red, Yellow, Green)
- Three-band filter: 12dB HPF, Notch, and LPF
- Reverb macro via SPACE knob
- Sound reverse / FLIP function with wet-only or dry+wet modes
- Preset storage with 3 slots per Triad
- Smooth CV-controlled morphing between presets
- External clock sync via CLOCK input (4 PPQ)
- Internal tap tempo via FUNC + VCF then tap CORE
- Stereo or mono input
- Stereo output
- CV inputs for IN, MIX, HPF, Notch, LPF, Morphing (bipolar -5 to +5V)
- 48 kHz, 24-bit audio
Controls & Jacks (31)
- IN — Sets the gain for the incoming audio signal before it enters the processing chain.
- SPACE — Macro control that simultaneously adjusts both the amount (depth) and size of the built-in reverb effect.
- NOTCH — 12 dB notch filter frequency control. Creates a frequency cut at a specific point in the spectrum, removing a narrow band of frequencies.
- FREQUENCY — Controls the primary frequency parameter for the selected core algorithm. In most algorithms this adjusts a pitch, rate, or cutoff-related f
- ORBIT — Controls an algorithm-specific parameter unique to each core effect. This is the 'wildcard' knob — its function changes completely with each
- CORE — Multi-function button for selecting core effects within a Triad, navigating preset slots, and switching between Triads when held with FUNC.
- HPF — 12 dB/octave high-pass filter cutoff frequency control. Rolls off low-frequency content below the set cutoff point.
- FLIP — Applies a reverse effect to the audio. The reverse function is clock-dependent and syncs to either the external clock input or internal tap
- FEEDBACK — Sets the feedback amount for the selected core algorithm. In most algorithms this controls how much of the output is fed back into the input
- MORPHING CV — Bipolar CV input (-5V to +5V) for morphing or switching between preset slots. ONLY functions when MEMO mode is active — patching this CV whi
- HPF CV — Bipolar CV input (-5V to +5V) for modulating the high-pass filter cutoff frequency.
- NOTCH CV — Bipolar CV input (-5V to +5V) for modulating the notch filter frequency.
- LPF CV — Bipolar CV input (-5V to +5V) for modulating the low-pass filter cutoff frequency.
- LPF — 12 dB/octave low-pass filter cutoff frequency control. Rolls off high-frequency content above the set cutoff point.
- SPACE CV — Bipolar CV input (-5V to +5V) for modulating the SPACE reverb macro knob in real time.
- FREQUENCY CV — Bipolar CV input (-5V to +5V) for modulating the FREQUENCY knob of the active core algorithm.
- FEEDBACK CV — Bipolar CV input (-5V to +5V) for modulating the FEEDBACK knob of the active core algorithm.
- IN CV — Bipolar CV input (-5V to +5V) for modulating the IN (input gain) knob in real time.
- R IN — Right channel audio input. If only L IN is patched, Radiant operates in mono mode (see MONO jack).
- CLOCK — External clock input, accepts 4 PPQ clock pulses. When a cable is inserted, Radiant automatically switches from internal to external clock s
- L IN — Left channel audio input. Accepts line/modular level signals. Use both L IN and R IN for stereo processing. Normalled mono input — patch her
- ORBIT CV — Bipolar CV input (-5V to +5V) for modulating the ORBIT knob (algorithm-specific parameter) of the active core algorithm.
- MIX CV — Bipolar CV input (-5V to +5V) for modulating the dry/wet MIX knob in real time.
- L OUT — Left channel audio output. Outputs the processed stereo left signal.
- R OUT — Right channel audio output. Outputs the processed stereo right signal.
- MIX — Controls the balance between the dry (unprocessed) input signal and the wet (processed) effect output.
- MEMO — Activates Preset Mode for loading user presets. Also used in combination with FUNC to save the current settings to a preset slot.
- VCF/TEMP — Toggles whether the three onboard filters (HPF, Notch, LPF) are applied to the wet signal only, or to both the dry and wet signals simultane
- TRIAD LED — Indicates which Triad is currently selected: Red LEDs for 1st Triad (Dub Delay, Feedback Shifter, Re-Trigger), Yellow LEDs for 2nd Triad (Di
- FUNC — Modifier/function button that unlocks secondary behaviors on other buttons when held simultaneously. Does not trigger any standalone action
- FILTER STATUS LED — Lights up when the onboard filters (HPF, Notch, LPF) are set to affect both the dry and wet signals simultaneously.
How-To Guides
- Saving a Preset
- Loading a Preset
- Potentiometer Calibration
- Vintage Dub Echo
- Feedback Shifter Harmonic Texture
- Mono to Chord — Instant Harmony
- Shimmer Reverb Pad
- Barberpole Phaser — Infinite Motion
- Re-Trigger Drum Stutter
- Morphing Between Three Presets
- Modal Resonator — Physical Modeling
- Dust Delay — Vintage Tape Echo
Explore the interactive Radiant panel on BleepDex — tap any control to learn what it does.
