DPW Design Mög D-2

Name: Mög D-2
Brand: DPW Design

Pre-amp, overdrive and distortion

10 HP Eurorack module

Four-band Eurorack preamp, overdrive, and distortion with manual or CV-controlled switching.

Features

Four independently adjustable frequency bands provide clean boost, overdrive, or distortion, and each band can be turned off.
Analog JFET distortion design voiced like a tube amp.
The evaluated switching circuit supports audio-rate control.

Gain— Sets the overall gain driving the multiband distortion section.
Vol— Sets the overall volume from the multiband distortion section.
Hi-Z— High-impedance input for guitar, bass, low-level sources, or line-level signals.
High— Sets the gain of the high-frequency band.
LoMid— Sets the gain of the low-mid band, which has the most gain.
HiMid— Sets the gain of the high-mid coloration band.
Low— Sets the gain of the low-frequency band.
Out— Eurorack-level audio output.
Hi-Z Preamp Level Indicator— Lights when the Hi-Z preamp is being driven too hard while setting the input level of a line-level device.
In— Eurorack-level audio input; it is mixed internally with the Hi-Z input.
Output Level Indicator— Lights when the output volume is set above 6 V as a visual mixing aid.
On CV— CV input for distortion enable; signals above 1 V turn the module on, from DC through high audio rate.
On— Manually enables the distortion and takes precedence over the On CV input.