DPW Design P1 Pedal I/O

Name: P1 Pedal I/O
Brand: DPW Design

Dual-channel Pedal I/O

4 HP Eurorack module

A dual-channel interface for connecting Eurorack audio with pedals, line-level equipment, guitar, or bass.

Features

Two independent channels can operate as dual mono or as a stereo interface.
AC coupling isolates the Eurorack system from equipment connected on the pedal side.
Soft, symmetrical clipping operates in both signal directions and can be used creatively when inputs are driven hard.

Channel 1 Eurorack Input— Receives Eurorack-level audio and attenuates it by 18 dB for the corresponding pedal output.
Channel 2 Eurorack Input— Receives Eurorack-level audio and attenuates it by 18 dB for the corresponding pedal output.
Channel 2 Pedal Output— Sends the corresponding Eurorack input at pedal level.
Channel 2 Eurorack Output— Sends the corresponding pedal input at Eurorack level, with protective soft limiting when driven hard.
Channel 2 Pedal Input— High-impedance pedal, line, guitar, or bass input, amplified by 18 dB for the corresponding Eurorack output.
Channel 1 Eurorack Output— Sends the corresponding pedal input at Eurorack level, with protective soft limiting when driven hard.
Channel 1 Pedal Input— High-impedance pedal, line, guitar, or bass input, amplified by 18 dB for the corresponding Eurorack output.
Channel 1 Pedal Output— Sends the corresponding Eurorack input at pedal level.