DPW Design Switch SW-1

Name: Switch SW-1
Brand: DPW Design

Quad bidirectional switch

8 HP Eurorack module

SW-1 is a four-channel Eurorack bidirectional switch with manual or CV control.

Features

Four independent bidirectional switches with manual or CV control.
Channels 1–2 and Channels 3–4 can be latched as pairs for stereo-bus switching.
CV control operates well above 100 kHz, supporting audio-rate wave splicing and signal-chain switching.
Remember: when connecting other equipment, limit current through the switch below 30 mA to prevent damage to the switching components.

Controls & Jacks (22)

Channels 3–4 Latch— Enables latching for Channels 3 and 4, making their LED-switches toggle and causing CV control to toggle on each positive CV edge.
Channel 4 Select— Illuminated manual selector for Channel 4; with latch off it is momentary and selects the Red connection while held.
Channel 3 Common— Bidirectional common connection for Channel 3; connected to Green when the switch is inactive and Red when active.
Channels 1–2 Latch— Enables latching for Channels 1 and 2, making their LED-switches toggle and causing CV control to toggle on each positive CV edge.
Channel 3 CV Input— Gate/CV control input for Channel 3; a high signal selects the Red connection.
Channel 1 CV Input— Gate/CV control input for Channel 1; a high signal selects the Red connection.
Channel 1 Common— Bidirectional common connection for Channel 1; connected to Green when the switch is inactive and Red when active.
Channel 2 Green— Bidirectional Green connection for Channel 2; connected to the common jack while the switch is inactive.
Channel 2 Select— Illuminated manual selector for Channel 2; with latch off it is momentary and selects the Red connection while held.
Channel 2 Red— Bidirectional Red connection for Channel 2; connected to the common jack while the switch is active.
Channel 4 Green— Bidirectional Green connection for Channel 4; connected to the common jack while the switch is inactive.
Channel 4 CV Input— Gate/CV control input for Channel 4; a high signal selects the Red connection.
Channel 1 Red— Bidirectional Red connection for Channel 1; connected to the common jack while the switch is active.
Channel 3 Select— Illuminated manual selector for Channel 3; with latch off it is momentary and selects the Red connection while held.
Channel 4 Red— Bidirectional Red connection for Channel 4; connected to the common jack while the switch is active.
Channel 2 Common— Bidirectional common connection for Channel 2; connected to Green when the switch is inactive and Red when active.
Channel 3 Red— Bidirectional Red connection for Channel 3; connected to the common jack while the switch is active.
Channel 3 Green— Bidirectional Green connection for Channel 3; connected to the common jack while the switch is inactive.
Channel 1 Green— Bidirectional Green connection for Channel 1; connected to the common jack while the switch is inactive.
Channel 4 Common— Bidirectional common connection for Channel 4; connected to Green when the switch is inactive and Red when active.
Channel 1 Select— Illuminated manual selector for Channel 1; with latch off it is momentary and selects the Red connection while held.
Channel 2 CV Input— Gate/CV control input for Channel 2; a high signal selects the Red connection.

How-To Guides

Select a stereo bus

Explore the interactive Switch SW-1 panel on BleepDex — tap any control to learn what it does.