dpw-design-zero-2

DPW Design Zero 2

Dual Zero Difference

2 HP Eurorack module

Zero 2 is a dual, CV-controllable zero-difference trigger for wave-splicing, zero-crossing and zero-difference detection, click-free switching, jitter, and synchronization.

Features

  • Two-channel, CV-controllable zero-difference trigger.
  • Each D input accepts logic or audio; leaving it unpatched makes its channel output toggle at comparator triggers.
  • Each output is 0 V low and +5 V high, suitable for logic control or audio.

Controls & Jacks (10)

  • Channel 2 Output— Logic output: 0 V low and +5 V high; intended for control signals but usable as audio.
  • Channel 1 D Input— Sets the state copied to the output at a zero-difference event; accepts logic or audio. With nothing connected, the output toggles in free-r
  • Channel 1 Output— Logic output: 0 V low and +5 V high; intended for control signals but usable as audio.
  • Channel 1 A Input— Comparator input A, compared against B; normalled to 0 V when unpatched.
  • Channel 2 B Input— Comparator input B; normalled to 0 V when unpatched.
  • Channel 2 D Input— Sets the state copied to the output at a zero-difference event; accepts logic or audio. With nothing connected, the output toggles in free-r
  • Channel 1 B Input— Comparator input B; normalled to 0 V when unpatched.
  • Channel 2 A Input— Comparator input A, compared against B; normalled to 0 V when unpatched.
  • Channel 1 Output Status— Indicates the status of Channel 1's output signal.
  • Channel 2 Output Status— Indicates the status of Channel 2's output signal.

How-To Guides

  • Compare two signals

Explore the interactive Zero 2 panel on BleepDex — tap any control to learn what it does.

416567d