dwyfor-tech-pas-isel

Dwyfor Tech Pas-Isel

8 HP Eurorack module

A voltage-controlled low-pass filter with resonant feedback and self-oscillation.

Features

  • Self-oscillates as a sine-wave oscillator at close to maximum resonance, without an audio input.
  • Provides separate DC-coupled cutoff CV and volt-per-octave inputs.
  • Has an AC-coupled audio input with gain trimming.

Controls & Jacks (9)

  • Resonance— Sets feedback from the output to the input, creating resonance around the cutoff; near maximum it enables self-oscillation.
  • Audio Input— AC-coupled audio input, with level set by the Gain trimmer.
  • Audio Output— Filtered audio output; produces a sine wave when the filter self-oscillates.
  • Frequency CV Input— DC-coupled cutoff-frequency CV input, attenuated by the CV Attenuator trimmer.
  • V/Oct Input— DC-coupled 1V/oct pitch-control input for the self-oscillating filter.
  • Frequency— Sets the low-pass filter cutoff frequency from approximately 25 Hz to 25 kHz.
  • Gain— Trimmer that attenuates the AC-coupled Audio Input.
  • CV Attenuator— Trimmer that attenuates the upper Frequency CV Input.
  • V/Oct Calibration— Front-panel calibration trimmer for setting accurate 1V/oct tracking of the V/Oct Input.

How-To Guides

  • Calibrate volt-per-octave tracking

Explore the interactive Pas-Isel panel on BleepDex — tap any control to learn what it does.

416567d