Intellijel Aux Mix 1U

Name: Aux Mix 1U
Brand: Intellijel

Stereo Mixer with Auxiliary Output Bus

32 HP Eurorack module

A three-channel stereo audio mixer with a separate stereo Aux send bus. It is for audio signals, not CV.

Features

Three stereo input channels; each left input is normalled to its right input for mono sources.
Each channel has level control, mute, and an input-level LED.
Channels 1 and 2 provide Aux level controls with Pre/Post routing.
Both Main and Aux buses have soft clipping and overload indicators.
Rear 3-pin links route Main and Aux audio with compatible Intellijel cases and modules, and can chain Aux Mix 1U units.

Controls & Jacks (25)

Mix Right Output— Right output of the main stereo mix.
Aux Right Output— Right output of the stereo auxiliary mix.
Mix Left Output— Left output of the main stereo mix.
Channel 3 Right Input— Right audio input for Channel 3; receives the left input normally when unpatched.
Channel 1 Level— Attenuates Channel 1's input signal sent to the main mix.
Aux Left Output— Left output of the stereo auxiliary mix.
Channel 2 Right Input— Right audio input for Channel 2; receives the left input normally when unpatched.
Channel 2 Level— Attenuates Channel 2's input signal sent to the main mix.
Channel 2 Aux Level— Attenuates Channel 2's signal sent to the stereo auxiliary mix.
Channel 3 Left Input— Left audio input for Channel 3; normalled to the right input when no plug is inserted there.
Channel 1 Left Input— Left audio input for Channel 1; normalled to the right input when no plug is inserted there.
Channel 1 Right Input— Right audio input for Channel 1; receives the left input normally when unpatched.
Channel 2 Left Input— Left audio input for Channel 2; normalled to the right input when no plug is inserted there.
Channel 1 Aux Level— Attenuates Channel 1's signal sent to the stereo auxiliary mix.
Channel 3 Level— Attenuates Channel 3's input signal sent to the main mix.
Channel 1 Mute— Silences Channel 1 at the main mix; also silences its auxiliary send when the Aux Pre/Post switch is set to Post.
Channel 3 Input Level— Indicates Channel 3 input strength before its Level and Mute controls; brighter illumination means a stronger signal.
Channel 1 Input Level— Indicates Channel 1 input strength before its Level and Mute controls; brighter illumination means a stronger signal.
Channel 2 Mute— Silences Channel 2 at the main mix; also silences its auxiliary send when the Aux Pre/Post switch is set to Post.
Channel 2 Input Level— Indicates Channel 2 input strength before its Level and Mute controls; brighter illumination means a stronger signal.
Channel 1 Aux Pre/Post— Selects whether Channel 1's auxiliary send is pre-fader/pre-mute or follows its Level and Mute controls.
Channel 2 Aux Pre/Post— Selects whether Channel 2's auxiliary send is pre-fader/pre-mute or follows its Level and Mute controls.
Channel 3 Mute— Silences Channel 3 at the main mix.
Aux Overload— Lights when the auxiliary output is overloaded; the output stage soft-clips high levels.
Mix Overload— Lights when the main mix output is overloaded; the output stage soft-clips high levels.

How-To Guides

Set Main and Aux balance

Explore the interactive Aux Mix 1U panel on BleepDex — tap any control to learn what it does.