Intellijel Pedal I/O 1U

Name: Pedal I/O 1U
Brand: Intellijel

Best Of Both Worlds

16 HP Eurorack module

An impedance-matching, level-conversion interface that connects Eurorack signals with external effects pedals, line gear, and instruments.

Features

Impedance conversion provides proper drive and loading for connected effects pedals or instruments.
Separate send and return gain controls.
The return path passes through a Class A triode emulator for tube-like overdrive at high gain.
Low-impedance MIX output supports long cables with lower noise and less outside interference.
The RETURN circuit can serve as a direct box for an instrument.

MIX Output— Outputs the impedance-matched modular-level return signal, with the dry/wet balance set by the Dry/Wet Mix control.
IN— Receives modular-level audio for conversion and impedance matching before it is sent to the linked external pedal or line-level device.
Phase Invert— Selects an in-phase return signal when down and a 180-degree phase-inverted return signal when up.
Dry/Wet Mix— Sets the dry/wet balance at the MIX Output: fully counterclockwise is dry, noon is equal dry and wet, and fully clockwise is wet.
Pedal/Line Level— Selects pedal/instrument level or line level for audio sent to the linked external device.
Send Level— Adjusts the level of audio arriving at the IN jack before it is sent to the linked external device.
Return Level— Adjusts the level of audio returning from an external effects pedal or directly connected instrument before it enters the modular system.
Clip Indicator— Lights slightly before the returning signal clips, helping set the return level with some headroom.