moddict-orphiser

Moddict Orphiser

Accumulator physics with linked Shadow CV generation.

12 HP Eurorack module

A 12HP accumulator that combines stepped CV movement with slew, randomness, inertia, gravity, and linked Shadow CV modes.

Features

  • ACM Output is 0–10V.
  • Shadow Output is 0–10V.
  • Trigger Output is a 10V, 10ms trigger.
  • Remember: holding Reset for 10 seconds or more returns every setting to its initial value.

Controls & Jacks (44)

  • Y— Displays and cycles the Y CV input assignment: Random, Dir, Min, Max, Slew, or Z.
  • Dir— Sets the probability of forward versus reverse Step direction.
  • X— Displays and cycles the X CV input assignment: Random, Dir, Min, Max, Slew, or Z.
  • Z— Mode-dependent Shadow parameter: ALT Step Size, envelope Decay, LFO Wave Select, Chaos Seed, Round Length, or Burst Rate.
  • Energy— Adds Moment clockwise from centre or Gravity counter-clockwise from centre; in Bend mode it offsets ACM.
  • ACM Output— Main accumulator CV output, 0–10V.
  • Min— Sets ACM's initial value.
  • Slew— Applies slew to ACM movement; further counter-clockwise increases the slew time.
  • Random— Adds random variation to Step Size; fully clockwise applies none.
  • Shadow— Displays and cycles Shadow modes; the selected mode is indicated on ACM LEDs 1–6.
  • Step Size— Sets the amount added to ACM per Step: centre is zero, clockwise is forward, and counter-clockwise is reverse.
  • Y CV Input— ±5V assignable CV input; its destination is selected with the Y button.
  • Step— Generates a Step and lights its embedded button LED.
  • Reset— Generates a Reset, cancelling operation and returning ACM to the Min-set initial value.
  • Max— Sets ACM's boundary value.
  • Shadow Output— 0–10V CV output for the selected Shadow mode.
  • X CV Input— ±5V assignable CV input; its destination is selected with the X button.
  • Step Trigger Input— 0–8V trigger input that generates Steps; also supplies the preferred Tap-tempo source when patched.
  • Reset Trigger Input— 0–8V trigger input that resets ACM to its Min-set initial value.
  • Energy CV Input— ±5V CV input that offsets the Energy control.
  • Z Pickup Right— Right Z pickup indicator: lights when the held Shadow parameter value is above the Z knob's physical position.
  • Boundary— Selects Clamp, Reset, or Reflect behavior when ACM reaches its boundary.
  • Trigger Output— 10V, 10ms Trigger output, or the selected mode's ALT Trigger/Gate when ALT Trigger is enabled.
  • Step Size CV Input— ±5V CV input that offsets the Step Size control.
  • Trigger Mode— Indicates whether Trigger Output is in ALT Trigger mode; off denotes normal Trigger mode.
  • ACM LED 16— ACM display LED 16.
  • ACM LED 15— ACM display LED 15.
  • ACM LED 14— ACM display LED 14.
  • Energy / Bend— Selects Energy behavior or Bend mode.
  • Z Pickup Left— Left Z pickup indicator: lights when the held Shadow parameter value is below the Z knob's physical position.
  • ACM LED 7— ACM display LED 7.
  • Tap Mode— Selects Off, Tap, or Tap 16Div automatic stepping.
  • ACM LED 3— ACM display LED 3.
  • ACM LED 1— ACM display LED 1, used to show ACM/Shadow state and selected settings.
  • ACM LED 2— ACM display LED 2.
  • ACM LED 4— ACM display LED 4.
  • ACM LED 5— ACM display LED 5.
  • ACM LED 6— ACM display LED 6.
  • ACM LED 8— ACM display LED 8.
  • ACM LED 9— ACM display LED 9.
  • ACM LED 10— ACM display LED 10.
  • ACM LED 11— ACM display LED 11.
  • ACM LED 12— ACM display LED 12.
  • ACM LED 13— ACM display LED 13.

Explore the interactive Orphiser panel on BleepDex — tap any control to learn what it does.

8c571ce