Moffenzeef Mito
Six-channel polyrhythm engine with swing and CV
18 HP Eurorack module
MITO is a 6-channel clock divider and polyrhythm generator for Eurorack. Each channel independently divides an incoming clock from divide-by-1 to divide-by-16, with per-channel mute switches, global swing, and global pulse width control. Its bipolar CV inputs and step-by-step division calculation (no averaging) make it a highly playable and modulation-friendly rhythmic tool.
Features
- 6 channel clock divider with bipolar CV per channel
- Divide by 16 to divide by 1 per channel
- Mute switch per channel
- Global swing knob with CV
- Global pulse width knob with CV — useful with envelope-sensitive modules
- Reset input — holds all channels HIGH while input is HIGH, allows odd-meter grooves
- Division calculated immediately per step — no averaging, no lag on clock change
- Wide panel spacing for live playability
- Over voltage protection
- Skiff friendly: low power and shallow mounting depth (20mm)
- Arduino compatible with ISP header on back for reprogramming
- Bipolar CV on all controls including swing and pulse width
Controls & Jacks (36)
- Channel I Division — Selects clock division for Channel I (divide by 16 to divide by 1)
- Channel II Division — Selects clock division for Channel II (divide by 16 to divide by 1)
- Channel III Division — Selects clock division for Channel III (divide by 16 to divide by 1)
- Channel IV Division — Selects clock division for Channel IV (divide by 16 to divide by 1)
- Channel V Division — Selects clock division for Channel V (divide by 16 to divide by 1)
- Channel VI Division — Selects clock division for Channel VI (divide by 16 to divide by 1)
- Amoeba (Global Swing) — Controls global swing amount applied to all 6 channels
- Global Pulse Width — Controls pulse width length for all 6 channels simultaneously
- Channel I LED — Activity indicator for Channel I
- Channel II LED — Activity indicator for Channel II
- Channel III LED — Activity indicator for Channel III
- Channel IV LED — Activity indicator for Channel IV
- Channel V LED — Activity indicator for Channel V
- Channel VI LED — Activity indicator for Channel VI
- Channel I Mute — Mutes/unmutes Channel I output
- Channel II Mute — Mutes/unmutes Channel II output
- Channel III Mute — Mutes/unmutes Channel III output
- Channel IV Mute — Mutes/unmutes Channel IV output
- Channel V Mute — Mutes/unmutes Channel V output
- Channel VI Mute — Mutes/unmutes Channel VI output
- Amoeba CV Input — Bipolar CV input for global swing control
- Width CV Input — Bipolar CV input for global pulse width control
- BANG! Input — Main clock/BANG input for divisions
- Reset Input — Resets all division counts to zero; held HIGH as long as incoming voltage is HIGH
- Channel I Division CV — Bipolar CV input for Channel I division control
- Channel II Division CV — Bipolar CV input for Channel II division control
- Channel III Division CV — Bipolar CV input for Channel III division control
- Channel IV Division CV — Bipolar CV input for Channel IV division control
- Channel V Division CV — Bipolar CV input for Channel V division control
- Channel VI Division CV — Bipolar CV input for Channel VI division control
- Channel I Output — Trigger/gate output for Channel I
- Channel II Output — Trigger/gate output for Channel II
- Channel III Output — Trigger/gate output for Channel III
- Channel IV Output — Trigger/gate output for Channel IV
- Channel V Output — Trigger/gate output for Channel V
- Channel VI Output — Trigger/gate output for Channel VI
How-To Guides
- Classic 3-Against-4 Polyrhythm
- Live Mute Performance
- Swingin' Hip-Hop Feel
- Generative Rhythm with Deviant
- Odd-Meter Groove with Reset
- Pulse Width as Envelope Length
- Buchla Easel Polyrhythmic Patch
- CV Division Sweep for Rhythmic Fills
- Slow Clock Ambient Trigger Landscape
- Four-on-the-Floor Techno Foundation
Explore the interactive Mito panel on BleepDex — tap any control to learn what it does.
