timo-rozendal-dyn

Timo Rozendal Dyn

14 HP Eurorack module

Stereo Eurorack transient shaper and dynamics processor with gate, maximizer, limiter, dry/wet mix, and an always-on output clipper.

Features

  • Stereo-linked processing follows the louder channel, preserving the stereo image.
  • The dry path is taken before Gain, so dry/wet blending returns the original input.
  • An always-on output clipper catches the final signal.
  • Controls and CV are smoothed for click-free movement.

Controls & Jacks (27)

  • Gate Threshold— Sets the gate threshold from −80 dB to 0 dB.
  • Sustain— Bipolar transient-tail shaping from −20 dB to +20 dB; centre is off.
  • Attack— Bipolar transient attack shaping from −15 dB to +15 dB; centre is off.
  • Maximize Curve— Sets the maximizer character from gentle at minimum to aggressive at maximum.
  • CV Scale— Sets modulation depth and polarity for the selected CV destination; centre is off.
  • L Out— Left processed audio output.
  • R Out— Right processed audio output.
  • CV In— 0–5 V modulation input, routed to the selected destination and normalled to 0 V when unpatched.
  • R In— Right audio input for true stereo operation.
  • CV Destination— Cycles CV routing: off, Gain, Gate, Attack, Sustain, Maximize, Limit, Mix, then off.
  • Limit CV Selected— Lights when the CV input is routed to Limit.
  • Mix CV Selected— Lights when the CV input is routed to Mix.
  • L In— Left audio input; normalled to the right input when R In is unpatched.
  • Gate CV Selected— Lights when the CV input is routed to Gate.
  • Attack Activity— Shows the amount of transient attack processing currently being applied.
  • Sustain Activity— Shows the amount of transient sustain processing currently being applied.
  • Maximize CV Selected— Lights when the CV input is routed to Maximize.
  • Sustain CV Selected— Lights when the CV input is routed to Sustain.
  • Gate— Sets the amount of proportional gate gain reduction, from 0 to 100%.
  • Maximize— Sets the amount of upward maximization, from 0 to 100%.
  • Mix— Equal-power dry/wet crossfade; minimum is fully dry and maximum is fully wet.
  • Gain— Bipolar input drive from −20 dB to +20 dB; centre is unity and drives every subsequent processing stage.
  • Limit— Sets limiter amount from 0 to 100%.
  • Gain CV Selected— Lights when the CV input is routed to Gain.
  • Attack CV Selected— Lights when the CV input is routed to Attack.
  • CV Level— Shows the actual applied modulation amount: CV input level multiplied by CV Scale.
  • Clip— Indicates how far the output is exceeding the clipper’s −0.5 dBFS ceiling.

How-To Guides

  • Process a drum loop
  • Set the gate for hiss control
  • Route CV to a parameter

Explore the interactive Dyn panel on BleepDex — tap any control to learn what it does.

9794c27